Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5

To configure DLP integration between SphereShield and Symantec, we'll first need to sign into the AdminPortal's admin area.

I.E: http://example.comany.com/admin

Change the "Enable DLP Integration" Setting to "Yes" in  Settings → DLP Integration, or by using the following URL: /admin/settings?category=settings_dlp_integration_category_header

Configure the following(bolded values are what need to be changed):

General
NameValuesDetails
DLP ProviderSymantecThe DLP Provider, choose Symantec
Integration MethodICAPSelect  ICAP for the integration protocol
DLP ICAP ServerIP/Hostname of the  Symantec Enforce serverEnter the IP or the hostname for the Symantec Enforce server
DLP ICAP Server portPort numberEnter the port on which ICAP requests will be sent to the Symantec Enforce server.
DLP ICAP Service Namereqmodthis is the service in the Symantec Enforce server we need to contact.
Enable Secure ICAPYes/NoEnable ICAP over TLS
DLP ICAP Block Message PatternThe configured block message response from the ICAP server (default: Content blocked due to policy violation)The format of the message for blocked message from the ICAP server

Example

Example of DLP integration via ICAP with symantec


  • No labels